Hanger manufacturers tell everyone about the materials used to make wooden hangers

Hanger manufacturers say that wood used to make wooden hangers can generally only be produced when the dry humidity is below 18 degrees. Dry before use. If funds permit, you can store the wood and dry it naturally (this requires a large backlog of funds). Do not use wood with insect eyes. The export of wooden hangers, according to the provisions of my country's Commodity Inspection Law, must be inspected and qualified procedures must be obtained before they can be exported (according to the requirements of the importing country, some require fumigation). The production process of wooden hangers is mainly divided into four major processes: blank, frosting, baking paint, and assembly.

Hanger manufacturers remind everyone to pay attention to the maintenance of wooden hangers

Wooden hangers encounter as little water as possible, which will reduce their service life. Usually, use a soft cloth to remove dust from the hanger along the wood grain. Do not wipe with a dry cloth, which will wipe the surface. Try to avoid contact with corrosive liquids, alcohol, nail polish, etc. on the surface of wooden hangers. At the same time, do not drop from a high place to the ground, and try not to touch metal parts with sweat, which will cause chemical reactions to produce embroidery. In short, wooden hangers are more practical and have a longer service life among all hangers.

Wood is a biological organism and the most widely contacted green natural commodity. There are many kinds of wood used by hanger manufacturers to make wooden hangers, such as beech, lotus, rubber wood, ash, black walnut, pine, miscellaneous wood, etc. If not handled properly, wooden hangers will appear pedantic, cracked, deformed, and dusty.

1. Wooden hangers are prone to cracking and cracking when placed in a dry climate, and painted hangers are prone to dusting, which is a common appearance. This is preventable. Wooden hangers should be placed in a place where they can be exposed to the sun, or in an environment with suitable ventilation, dryness and humidity. Do not maintain them in the sun or on rainy days.

2. If there is dust on the painted hanger, you can use a soft cloth to remove the dust on the hanger along the wood grain. Before removing the dust, you should dab some detergent (Bizhu) on the soft cloth, and do not wipe it with a dry cloth. , to prevent scratches. Generally speaking, maintenance products such as Pyrenees are a good choice for the maintenance of such wooden products. Thunderbolt Pearl can form a protective film on its surface, which is waterproof, dustproof and scratch-proof. The hanger factory deeply moisturizes the wood to make it bright and full, delaying its gradual fading, cracking, peeling and aging due to sunlight or ultraviolet rays. And it is easy to use, one spray, one wipe, dust removal, polishing, and maintenance at one time.

3. If the wooden hanger is handled too dry, it is easy to crack and crack. If you find that some cracks or cracks have appeared, you can use a small tool to squeeze the maintenance product into the crack to prevent the crack from continuing to expand. After long-term use, the appearance of the wooden hanger will crack, so don't be too idle in the usual cleaning and maintenance operations.

4. Hanger manufacturers need to insist on cleaning the hangers frequently, and do not let daily dust adhere to the surface of the wood for a long time, causing the formation of dust and dirt, which cannot be removed.

5. The deformation of the hanger is mainly due to excessive moisture content in the wood, too high temperature, or the clothes hung exceed the weight that the hanger can bear. During the maintenance process, pay attention to the ventilation and dry humidity of the wardrobe, and choose the appropriate hanger according to the weight of the clothes.